The curtain track can currently only be used with a Motionblinds motor (CM-36-W). The EVE (homekit) variant will come in mid-2023.
Runners come with the curtain rails. Only single + double pleated curtains and wave curtains can be used on these runners. This is because the runners are only suitable for these types of curtains. You hook the fabric of your curtains around the motor, keeping it out of sight. The curtain runners can carry and pull a maximum of 35kg. There are 12 runners per 1 metre of curtain track. The fabric can be hooked around the motor so that the motor is not visible.
The mounting brackets for the curtain rails will need to be applied every 50cm. When you order a curtain rail wider than 290cm, it will be delivered in two parts. You can click these parts together so that the runners roll smoothly over them.
System measurements
Minimum and maximum measurements
The minimum width for curtain rails is 50 centimetres.
The maximum width is 580 centimetres.
Install your curtain rails
Follow the steps in this guide and install your curtain rails: https://view.publitas.com/motion-blinds/motionblinds-cm-36-ble-setup-guide/page/8-9
Reset the electric curtain rails
It may happen that because of a problem, malfunction or error, you may need to reset your electric curtain rail. Hold the program button for 10 seconds to delete the connection between the blind and the app. The LED lights up 5 times and the blind steps up and down 1 time to indicate that the connection is reset. Now the blind can be reconnected. Shortly press the program button to activate program mode. The blind will start stepping up and down. Hold the reset/program button for at least 20 seconds to reset the blind. The blind will stop stepping twice. After the second stop, the blind will give one extra step to indicate that it has been reset. Resetting the blind results in deleting the end positions and connections of the blind with apps and remote controls.
Close up pictures